|
SkidGuard® SkidGuard® is a slide protecting top coat over surfaces, requiring skid resistance. SkidGuard® forms a durable, hard, fully adhered, aggregate filled coating. SkidGuard® is ideal for trench plates, roofs, roads, playgrounds and walkways. It is available in 5 gallon pails and 54 gallon drums. ADVANTAGES: Adheres
tenaciously after proper installation and curing. Rapid curing at modest
temperatures leaving a traffic bearing surface in as few as two (2) hours.
Fully cures in 12 hours above 55 F and dry. Resistant to scuffs, bacteria,
algae and industrial pollutants. Air quality compliant throughout the
Designed
for use as a wearing surface near building entries with inclined or smooth
walkways that can become slick when dust or moisture is present.
APPLICATION: SkidGuard® may be applied between 45 F and 115 F; must have a minimum curing time of 8 hours before temperature drops below 45 F. Apply over a clean, dry surface, free of unsound materials and/or contaminants. Do not allow to freeze prior to a full cure. Prior to application over existing roof surfaces, repair all large splits, holes and/or ruptured blisters wherein the underlying piles have fractured or have been cut during repair. Moisture can be present in surfaces like concrete for several days so allow 3-4 days after rain or sprinkler depositing before application. Also, it is advisable to apply material on concrete surfaces in no more than two thin applications so the concrete may breathe. On metal surfaces reduce to a minimum rust, cutting lubricants or oxidation before application. Any cleaning agents must be thoroughly rinsed. To assure homogeneity, stir SkidGuard® slowly and well before use. Some aggregates may settle during shipment but should easily disperse with a manual dowel or hand mixer. Avoid trapping excessive air in mixture to minimize pinholing. Apply as follows: Over concrete or other porous surfaces: Roll or spray an even coat at a rate of 1-2 gallons per 100 square feet. A second application of 1 gallon or less per 100 square feet may follow once the first application is dry to the touch. Over metal or non-porous surfaces: If heavy aggregate type is used, material should be roll applied with a tight nap roller and applied as a single pass. Multiple passes may displace the aggregate producing an irregular pattern. Clean implements, including hoses with cool water immediately after using SkidGuard® may crosslink if left standing in sun exposed spray hoses. STORAGE AND HANDLING: Keep
out of reach of children. |
|||||||||||||||||||||||||||||||||||||
