•	Home
•	About Us
•	DARM®
•	O'Shield®
•	SprayShield®
•	RoadWeld®
•	SteelGuard®
•	CreteWeld®
•	CreteGuard®
•	PetroGuard®
•	GatorGuard®
•	SkidGuard®
•	Useful and Interesting Links
•	FWI Registrations and Certifications
•	Contact Us
Fossil Works, Inc. PO Box 61638 Boulder City, NV 89006-1638 877.336.7745 fax 702.293.7898 info@fossilworksinc.com
FWI MISSION STATEMENT: Fossil Works, Incorporated will strive to manufacture quality products for repair, maintenance and improvement projects. Our products will provide practical solutions for homeowners and contractors and will be easy to use and durable. Packaging for our products will meet the functional requirements of our customers and will be distributed in the most efficient and timely manner in order to achieve the best industry value.
All images, concepts, text and information contained on this site are protected by copyright law and no unauthorized use, copying, or reproduction in any form is permitted. Last update January 2008. © 1998 -2008 Fossil Works, Incorporated

GatorGuard®

GatorGuard® is an asphalt coating surface treatment for alligator or divot scarred pavement.

ADVANTAGES:

May be applied at above freezing and on most damp or dry surfaces.
Rapid curing at modest temperatures; usually allows same day opening to traffic in less than two hours.
High temperature, tire scuff resistant to power steering abuse.
Contains no biocides.
Non-hazardous in cured form; may be disposed as cured residue in any municipal landfill.

USES:

Designed as a permanent, protective top coating for playgrounds, parking lots, industrial floors, driveways, surface streets and highways.
Ideal filler and leveler (undiluted) for shallow divots in most surfaces.

TYPES:

FIRM: For heavy use especially in parking lots where wheels are making tight turns--torsion stress and where ide cracks are visible.

NOTE: Effective May 1, 2004 the FLEX version will not be available until further notice.

FLEX: For use where traffic is straight rolling as well as providing long term waterproofing.

APPLICATION:

Apply only onto clean, dry surfaces where all contaminates have been removed, i.e., build up crankcase drippings, oil spots, loose traffic paint, dirt. Areas having a build up of grease or loose paint shall be scraped, wire brushed and then torch prepared to completely eliminate the contaminate from the underlying surface. These areas can be pretreated with PetroGuard®

GatorGuard® is supplied in a thick yet pourable consistency. This ensures anti-settling properties. PRIOR TO APPLICATION, STIR WITH A DOWEL OR MIX BLADE. Do not dilute so that cure time, shrinkage and sufficient coverage are not affected. A soft (gum rubber) squeegee application, broom, screed or roller is recommended to adequately install material. Application will vary due to amount of cracking and porosity but should be 6-9 gallons per 100 square feet. The coating should extend a minimum of 4 inches beyond all cracks to assure adequate coverage.

GatorGuard® is dependent upon curing so do not apply when snow, rain or heavy dew is expected within 24 hours. Apply this product during daylight hours at temperatures above 60 F and rising.

Immediately clean tools, including hoses, with cool water after application. GatorGuard® may crosslink if left standing in sun exposed spray hoses.

STORAGE AND HANDLING:

Keep out of reach of children.
Do not allow to freeze prior to application.
Do not mix with any other products.
Avoid prolonged skin contact.
Keep containers tightly sealed when not in use.
Do not take internally. Do not induce vomiting if swallowing—call a physician immediately.
Shelf life is 6 months.

GatorGuard® is available in one (1) gallon and 5 gallon pails.