•	Home
•	About Us
•	DARM®
•	O'Shield®
•	SprayShield®
•	RoadWeld®
•	SteelGuard®
•	CreteWeld®
•	PetroGuard®
•	GatorGuard®
•	SkidGuard®
•	Useful and Interesting Links
•	FWI Registrations and Certifications
•	Contact Us
Fossil Works, Inc. PO Box 61638 Boulder City, NV 89006-1636 877.336.7745 fax 702.293.7898 info@fossilworksinc.com
FWI MISSION STATEMENT: Fossil Works, Incorporated will strive to manufacture quality products for repair, maintenance and improvement projects. Our products will provide practical solutions for homeowners and contractors and will be easy to use and durable. Packaging for our products will meet the functional requirements of our customers and will be distributed in the most efficient and timely manner in order to achieve the best industry value.
All images, concepts, text and information contained on this site are protected by copyright law and no unauthorized use, copying, or reproduction in any form is permitted. Last update January 2008. © 1998 -2008 Fossil Works, Incorporated

CreteGuard®

CreteGuard® is a protective sealer for aged concrete. It restores the surface and provides waterproof protection. It is packaged in one (1) gallon and five (5) gallon pails. CreteGuard® is available in many colors and patterns; its shelf life is six (6) months.

ADVANTAGES:

May be applied on most aged concrete
No special tools required.
Sand or other aggregate can be added to provide a slip resistant surface.
Can be applied to surfaces with mild deposits of oil/grease.
Little to no odor—great for indoor applications.
Dries tough and launders well. May be cleaned with mild soap and hose rinse.
Good curing at modest temperatures; usually allows same day use in less than 10 hours.
Non hazardous in cured form; may be disposed as cured residue into any municipal land fill.

USES:

A permanent protective top coating for concrete and asphalt surfaces such as playgrounds, sidewalks, parking lots, industrial warehouse floors, driveways, streets and highways.
Coating improves the appearance of aged surfaces.

APPLICATION:

Apply only onto clean, dry surfaces where all contaminates have been removed. Remove crankcase drippings, oil spots, loose traffic paint, grease with a scraper, wire brush and then torch; may use PetroGuard® to prime area as well. To restore divots, depressions or slightly off grade areas, mix undiluted SteelGuard® with 20 mesh sand to a thick paste consistency and place into the low areas and trowel smooth. Once cured, CreteGuard® may be applied.

Prior to application, stir to mix. Do not dilute, CreteGuard® is designed to be used directly from the container. CreteGuard® will handle like water based paint in application. It is best when two coats are used to ensure hiding of the underlying surface. Apply with a roller or squeegee or spray applied with heavy duty commercial equipment.

It is recommended to only apply at a spread rate of 1/8 gallon per square yard during daylight hours at temperatures above 50 F and rising with no snow, rain or heavy dew in the forecast for at least 24 hours.

Immediately clean tools, including hoses, with cool water after application, CreteGuard® may crosslink if left standing in sun exposed spray hoses.

STORAGE AND HANDLING:

Keep out of reach of children.
Do not allow to freeze prior to application.
Do not mix with other products.
Avoid prolonged skin contact
Keep containers tightly sealed when not in use.
Do not take internally. Do not induce vomiting if swallowed—call a physician immediately.

For some tips on repairing concrete. . .

Concrete Repairs